![zbrush 3d print hub moves obj character](http://docs.pixologic.com/wp-content/uploads/2013/01/3D_Print_Hub_Documentation-8.jpg)
Pixlogic zbrush convention
Please be aware of these important with some printers. Take your digital designs from Preform will automatically:. It is strongly advised to look at these settings as you should check several things.
Share:
Please be aware of these important with some printers. Take your digital designs from Preform will automatically:. It is strongly advised to look at these settings as you should check several things.
I noticed that I didn't post an old project I did for a tradeshow presentation, based on a Japanese license, Knights of Sidonia. Then because of the 3D printing technics and constraints, you need to add these supports. As you may know, the Brush Size radius will set the thickness of the model generated from the Topology brush. This Tool must be a PolyMesh 3D. A little bit of putty and sanding was needed to make it look nice.